at Yingling Aviation in Wichita, Kansas, United States
Job Description
Independently operate, install, adjust, and maintain integrated computer/communications systems, consoles, simulators, and instrumentation used for air and space vehicle launch, tracking, positioning, and evaluation. Configure and troubleshoot data acquisition and test measurement equipment without supervision. Accurately record, analyze, and interpret complex test data for engineering evaluation and mission readiness. Apply standard procedures to ensure system performance and reliability.
- Basic understanding of wiring diagrams and methodology: wire marking, wire routing clamping, symbols, and simple interconnect diagrams, bonding/grounding
- Basic understanding of parts handling and disposition
- Basic knowledge of electricity
- Basic understanding of avionics hardware removal and replacement: equipment racks, mounting structures, standard fasteners
- Documentation and Regulatory Compliance: understand and use of MM manuals and company paperwork such as removals and squawk sign off.
- Understanding and able to use computer systems such as Corridor, ATP, Textron One view.
- Basic Understanding of Avionics test equipment: Multimeter, Laversab Air data tester, Barfield Air data tester, Druck Air data tester, GE Air data tester, IFR4000/6000, TRX
- Thoroughly understand the fundamental principles and accurately demonstrate the correct procedures for grounding an aircraft.
- Demonstrate the proper procedures and safety precautions to apply power to an aircraft
- Perform an acceptance inspection for newly arriving aircraft.
- Perform an inventory of aircraft equipment.
- Demonstrate a thorough understanding of the fundamental principles and correctly perform the procedures for removing and replacing avionics hardware.
- Demonstrate a thorough understanding of fundamental principles and accurately perform the proper procedures for installing airframe components.
- Exhibit in-depth knowledge of torque principles and correctly apply proper torquing procedures for threaded fasteners and plumbing lines.
- Fully understand and correctly execute the procedures for inspecting, removing, and installing safety devices, including AMSafe components.
- Ability to safely operate a digital or analog multimeter to measure voltage, resistance, and continuity in avionics circuits. Understanding test lead configuration, range selection, and safety precautions. Can interpret basic readings and identify common faults in wiring or components with minimal guidance.
- Able to set up and operate the Laversab Air Data Test Set for pitot-static system checks. Understands basic test sequences, menu navigation, pressure calibration functions, and can verify airspeed, altitude, and vertical speed parameters. Can detect leaks or discrepancies and interpret displayed data under supervision.
- Proficient in configuring and using the Barfield Air Data Tester to simulate and verify pitot-static inputs. Understands connections to aircraft test ports, performs altitude and airspeed sweeps, and monitors pressure decay/leakage. Able to operate the tester through standard procedures and recognize abnormal responses during functional tests.
- Capable of independently performing basic test functions with the Druck unit, including automated test scripts for altimetry, airspeed indicators, and static systems. Understands parameter input, reference value comparison, and test documentation. Can troubleshoot common interface or pressure issues.
- Understands the operational workflow of the GE Air Data Tester, including initiating and controlling tests for pitot-static validation. Able to conduct altitude and airspeed checks, input test parameters, and interpret test results in relation to maintenance manuals. Can assist with calibration procedures and report data accurately.
- Demonstrates the ability to set up and operate the IFR4000/6000 or TRX test sets to evaluate transponder, DME, TCAS, and communication systems. Understands test modes, antenna connections, and functional test procedures per manufacturer specifications. Can interpret pass/fail results, adjust signal parameters, and verify system compliance with minimal oversight.
- Able to configure and operate a TCAS test set to perform system interrogations, verify bearing accuracy, and simulate traffic scenarios. Understand aircraft interface connections, test range limits, and can evaluate system response under test conditions. Capable of identifying common system faults and validating TCAS functionality in line with maintenance procedures.
- Comprehend in depth the basic principles and demonstrate, to a high degree of proficiency, the ability to use a volt / ohmmeter.
- Comprehend in depth the basic principles and demonstrate, to a high degree of proficiency, the ability to perform slip torque checkout of autopilot servos
- Installs various communication / navigation equipment
- Fabricates electrical connectors and wire bundles
- Fabricate Coax Cable assemblies and terminations
- Evaluates installed equipment with various types of test equipment
- Understands integrated circuits and digital techniques
- Perform Ground and Flight Test Procedures Avionics Systems
- Comprehend in depth the basic principles and proficiently demonstrate proper aircraft fuel servicing procedures.
- Comprehend in depth the basic principles and proficiently demonstrate inspection procedures.
- Comprehend in depth the basic principles and demonstrate, to a high degree of proficiency, a basic knowledge of electrical principles.
- Comprehend in depth the basic principles and demonstrate, to a high degree of proficiency, a working knowledge of the alternating current generating systems on aircraft.
- Comprehend in depth the basic principles and demonstrate, to a high degree of proficiency, a working knowledge of the direct current generating systems on aircraft.
- Comprehend in depth the basic principles and demonstrate, to a high degree of proficiency, the ability to inspect and troubleshoot electrical problems.
- Comprehend in depth the purpose and use of the auxiliary generator system on aircraft.
- Demonstrate, to a high degree of proficiency, the ability to remove and install basic electrical / avionics system components.
- Autopilot/Flight Director/Yaw Damper/VHF/HF Systems operation and checkout
- AFIS / Data-Link/Audio Integrating/Satcom Communication Systems operation and checkout
- Cockpit Voice Recorder (CVR) operation, checkout, and download procedures
- Emergency Locator Transmitter operation and checkout
- Perform Airshow configuration and update
- Stall Protection System operation and checkout
- Flight Data Recorder ( FDR )
- Engine Indicating & Crew Alerting System ( EICAS )
- Electronic Flight Instrument System (EFIS)
- Pitot/Static/Weather Radar, Enhanced Ground Proximity (EGPWS) Systems operation and checkout
- Traffic Collision Avoidance System (TCAS) operation and checkout
- Radio Altimeter (Rad Alt), CHF Omni Range (VOR operation and checkout
- Distance Measuring Equipment (DME) operation and checkout
- Transponder System (ATC) operation and checkout
- Flight Management System (FMS) operation and checkout
- Global Positioning System (GPS) operation and checkout
- Download and update system databases
- Aircraft Maintenance Diagnostic Computer
- Document maintenance actions according to regulatory and organizational standards.
- Understand and use of MM manuals and company paperwork such as removals and squawk sign off.
- Understanding and able to use computer systems such as Corridor, ATP, Textron One view.
- Class Training FAR 43-13-1A, Chapter 11, Electronic Systems
- Read and understand complex wiring diagrams
- Understand and accomplish aircraft Service Bulletin
- Accurately estimate wire lengths for installation
